Low-cost drilling equipment & supplies

We supply the following low-cost drilling equipment and supplies (to order) from our workshop in Madagascar. We can supply both local and international clients.

Geotextile
This is available in different specifications, depending on your application. Please contact us for advice.

Borehole casings, screens and sumps
We produce the following specification for casings, screens and sumps:

• Casing: 125mm OD, 113mm ID, 6mm wall thickness, 3 metres long, flush threaded with square thread profile.
• Screen: 63mm OD, 52mm ID, 5.5mm wall thickness, 3 metres long, non-continuous slotted, open area approximately 11%, slot size 1.5mm, socket threaded with V-thread profile, threaded 125/63mm reducer on either end for casing and sump.
• Sump: 125mm OD, 113mm ID, 6mm wall thickness, 1 metre long, plug on one end.

Click here to view our recommended configuration for screens (French). Borehole design is courtesy of PAT Drill.

Alternative configurations are also possible - please contact us with your requirements.